Turn On the SkyBox F5 or f3

1- Press menu and go to tools.

2- Upgrade file by USB

Upgrade mode: image file,

3- Press ok on the start.

It will load the firmware and ask you to verify before installing new firmware.

4- Press Ok and wait until is CCcam setup for a SkyBox F5.

CLINE SETUP

1: Go into the main menu

2: Select Network, enable your network and set the IP address to DHCP. Go back to network.

3: Select "CCcam Client Setup" If you cannot see CCcam setup in the menu jump to number 9

4: If you have a cccam.cfg on your usb, we provide the CCcam.cfg file, ask for the full configured file from us to get all of our

channels. Copy the CCcam.cfg file into the root folder from your USB stick. Do not copy the file in a specific folder. Select 'Update.

5: On new window, highlight 'CCcam.cfg', press green button on remote (ADD). This will place a tick by it, the press yellow button on

Remote (READ)

6: Once finished, select 'Manage Config Files' and on new window select cccam.cfg again

7: A new page comes up with your cline on it, press green button on remote to make it active (tick should appear by it) Exit out of

all menus to TV and select a pay channel.. It should clear, if not go back into menu, select Network, then 'Network Setup', and turn

DHCP 'off' by using arrow keys and then hitting apply.

8: if channel still doesn’t clear, reboot box and router by unplugging both from power and plugging back in (router first)

9: if you can’t see this option go to network and press 6666 this should bring up hidden menu or 8888

10: for those who didn’t make a cccam.cfg on their usb, you can add it manually.